Some WeatherTech® Side Window Deflectors require S-clips for installation to ensure proper window operation. Here is how to install the S-clips with the Side Window Deflectors. WeatherTech® Side Window Deflectors provide fresh air enjoyment and protection from the elements without sacrificing your vehicle's original equipment look. Crafted from the finest 3mm tinted acrylic material, each Side Window Deflector is precisely manufactured to provide a custom, vehicle-specific fit. - WeatherTech® Side Window Deflectors offer you fresh air enjoyment with an OE Look - Crafted in Germany from the finest 3mm lightly tinted cast acrylic material - WeatherTech® Side Window Deflectors Are Precision Machined To Perfectly Fit Your Vehicle - These low protfile window deflectors help to reduce machined to perfectly fit your vehicle - Optically transparent: OEM quality - Sleek aerodynamic styling helps keep side windows dry in the rain - Installation is quick and easy with no exterior tape needed; installs inside the window channel - Limited 3 Year Warranty __ Transcript: If your vehicle requires an S-Clip to install your WeatherTech Side Window Deflectors, locate the clip and note that one arm up the S on the clip is shorter than the other. It is this arm of the clip that needs to be inserted between the door framing and the rubber weatherstripe. Make sure you keep the top of the clip about 3/8 of an inch from the top of the door frame. Next, as you slide the machine flange at the front of the deflector into the forward window channel, it is very important that the end up the deflector rest on top of the outer window sill and weatherstrip. Make sure the and is on top of the sill and not sliding down into the door. With the front end in position, bow the deflector toward you and slip the rear and flange into the longer arm up the S-Clip. Now working along front to back, twist and slide the flange up into the window channel. A little outward pressure helps seat the deflector properly in the channel. Finally, slowly raise the window to fully seat the deflector into the window channel. It's best to apply a little outward pressure on the deflector as the window closes for the first time. If the automatic reverse feature activates while raising the window, carefully sandwich the window between your hands and apply slight upward pressure as the window rises. Now, just leave your windows closed for 12 hours and your WeatherTech side window deflectors are installed. __ See a list of all discounted WeatherTech products here: http://partsengine.ca/m-91-weathertec... Visit PartsEngine.ca for all Truck, SUV, and Jeep parts and accessories. http://www.partsengine.ca
WeatherTech: Side Window Deflector with S Clips - Installation Guide - YouTube |
| 3 Likes | 3 Dislikes |
| 2,663 views views | 298 followers |
| Cars & Vehicles | Upload TimePublished on 26 Aug 2014 |
Không có nhận xét nào:
Đăng nhận xét