Featuring the QuickTurn™ Hardened stainless steel fastening system, the WeatherTech® Mud Flaps features the no drill DigitalFit™ set without the need for wheel/ tire removal, and most importantly, without the need for drilling into the vehicles fragile painted surface! Ensuring a contour specifically for each application and molded from a theromplastic resin, the WeatherTech® Mudflap no drill DigitalFit™ will offer undeniable vehicle protection. - QuickTurn™ hardened stainless steel fastening system - Literally "Mounts in Minutes™" without removing the wheel - Engineered specifically for each application - No need for wheel/ tire removal in most applications - Molded from an OE approved thermoplastic resin - The WeatherTech® Mudflap No Drill Digital Fit™ will offer undeniable vehicle protection - No drilling through the steel fender, preventing rust and most importantly without the need for drilling into the vehicles fragile painted surface - Limited 3 Year Warranty __ Transcript: Hi, I'm Quinn Gifford and today I'm going to show you how to install the WeatherTech No Drill Mud Flap on this 2010 Chevy Tahoe. The unique feature of WeatherTech No Drill Mud Flaps, is that they fasten securely to your vehicle, without drilling any holes through metal or its protective rust-proof coating. We do this by using pre-existing holes and fasteners that have factory rust-proofing and paint applied. If no holes are available, we use the WeatherTech patented QuickTurn Fastener. The QuickTurn is made of hardened stainless steel with a specially designed screw that allows a locking arm to rotate inside the fender liner. Then clamped down tightly on the fender lip, holding the flap securely in place. Not all vehicles need a QuickTurn, but we never drill through metal, because we do not want expose your vehicle to corrosion. In the case to the 2010 Tahoe, existing fasteners on your vehicle, and 2 1 inch stainless steel bolt will hold your mud flaps securely in place. The tools you'll need for the Tahoe are: a small socket set, a small Phillips screwdriver, a small flat blade screwdriver and a 7/ 16th box end wrench. So let's get started. Choose the driver side mud flap indicated by an "LH" stamped on the back. Hold it in position, and you can easily identify the existing fasteners to be removed. In the case to the Tahoe, these two hex head screws and these two plastic rivets need to be removed. Using a 7 millimetre socket, back out the screws. Keep them handy for reuse installing the mud flaps. With the flat blade screwdriver, carefully remove the center portion of the plastic rivets. Once the center portion is removed, the outer body in the river it can be removed. Keep one on the rivet assemblies handy for installing your mud flap Now fit the WeatherTech Mud Flap tightly into position. Line up the holes in the mud flap with the existing holes and replace the hex head screw you just removed and snug them to hold the flap in position, but do not fully tighten. Next using one other previously removed plastic rivets, insert the outer body of the rivet through the upper are the two remaining holes in the mud flaps. Insert the inner core the rivet and firmly press it in, until it seats into position. In the last remaining hole, insert the 1 inch stainless steel bolt through the mud flap, the plastic liner and the metal behind it. With the matching nut, reach behind the mud flap, and feel the bolt end and thread the nut onto the ball in hand tighten. Finally, it is important to press the mud flap firmly into position, fitting the contour of the fender. And tighten the two hex head screws and the stainless steel nut and bolt. And that's it! Repeat the process on the other side and your WeatherTech Mud Flaps are installed. I'm Quinn Gifford for WeatherTech. __ See a list of all discounted WeatherTech products here: http://partsengine.ca/m-91-weathertec... Visit PartsEngine.ca for all Truck, SUV, and Jeep parts and accessories. http://www.partsengine.ca
WeatherTech: No Drill MudFlap: Installation Guide/ Tips (2010 Chevrolet Tahoe) - YouTube |
| 0 Likes | 0 Dislikes |
| 5,038 views views | 298 followers |
| Cars & Vehicles | Upload TimePublished on 22 Aug 2014 |
Không có nhận xét nào:
Đăng nhận xét