Providing a rugged work surface that is tough enough to withstand dents and dings while protecting your most fragile cargo from sliding around your truck, the BedTred Truck Bed Liner Pro Series is for you. The BedTred system is a 5-piece zipped liner that installs with hook and loop fasteners, without damaging the truck bed. While traditional spray-in liners can quickly fade and chalk, the BedTred material is fade and UV resistant. The 1/4" thick foam is similar to that used in life jackets and will not absorb water, resisting mold and mildew. Water will simply run off the surface, through the zippered perimeter, out the factory drain holes in the truck bed and will dry in as little as 20 minutes. - TPO Composite Surface - No sanding, no preping and no damage installation - Hassle free quick & easy hook and loop install - Custom contoured fitment for a snug tight finish - Heavy Duty ¼" textured anti-skid surface - Thick foam layer provides superior dent protection - Cusioned knee-friendly surface - Non-woven fiber backing will not scratch truck bed __ Transcript: Hi, I'm Jim. Today, I'm going to install BedRug's all new BedTred Truck Bed Liner. The BedTread can be installed by one person, is custom form to fit the contour and shape up your truck bed and will outperform any spray-in or drop-in liner on the market. The BedTred comes in five sections: floor, two side walls, bulk head and tailgate section. The BedTred will attach to the truck bed using adhesive back hook fasteners. There's no sanding, drilling or damage to the truck bed during installation. The first step is to lay out each section face-down and then attach all the hook fasteners to the factory fiber backing. Once the hook fasteners have been attached, zip the side walls and ball kit to the floor like so. Zipper by the way is poly-coated and is made of non-corrosive zinc alloy. With the sections assembled, attach the ball kits to the side wall with the two inch hook fasteners included in the kit. With the BedTred fully assembled, place the it into the truck bed in center it over the wheel wells. All BedTreds are vehicle specific, so you'll notice that the floor section has ribs that match to the ribs in the truck bed floor. The easiest way to install to the truck, is to fold the BedTred in half, exposing one side on the floor adhesive. Wipe down the truck bed with isopropyl alcohol at each point of contact. Remove the adhesive tape, and then just stick it down. You want to repeat this on the other half. With the floor section attached, we continue the same process for the ball kit panel and the sidewalls. And lastly, we attach the tailgate section using the same process. The BedTred is backed by a limited lifetime warranty and a 30-day no questions asked, money back guarantee. That's it! Easy installation, great-looking custom-fit and your truck bed is now protected with an anti-skid heavy duty service. For more information, or to locate a dealer near you check out BedRug's website. __ See a list of all discounted BedTred products here: http://partsengine.ca/m-48-bedtred.aspx Visit PartsEngine.ca for all Truck, SUV, and Jeep parts and accessories. http://www.partsengine.ca
BedTred: BedTred Pro Series: Truck Bed Liner - Installation Guide - YouTube |
| 0 Likes | 0 Dislikes |
| 208 views views | 298 followers |
| Cars & Vehicles | Upload TimePublished on 22 Aug 2014 |
Không có nhận xét nào:
Đăng nhận xét